TFK mono 2 Instrucciones De Uso página 14

close the two sports belt attachments (g) on the left and right around
the rear frame tube.
Fig. 10.:
To adjust the position of the backrest, press the latch (15) on the back
of the seat backrest and swivel it downwards. To adjust the backrest to
an upright position, pull the straps of the lock and push the backrest
upwards.
Fig 11.:
Push the belly bar onto the frame tubes from above. Secure it by
flipping the clamping levers (16) left and right. You can move it into
different positions by pressing the buttons (17).
Insert the canopy left and right into the holders (18) on the folding joint.
Then guide the straps on the left and right at the upper end through
the loop on the height adjustment and fasten each with a push button
(a) on the inside of the canopy. Use the Velcro straps (b) to connect it
conclusively to the seat cover and the two press studs on the canopy
flap to connect it to the backrest. If you open the zip (19), you can
open the soft top further to the front.
Fig 12.:
Always secure your child with the 5-point harness. Close the belt buckle
(20) by audibly engaging the two plugs (21) in the belt buckle. To open
the buckle, simply press the button in the middle of the buckle. The
harness can be adjusted to the size of your child with the tensioning
system and the height lock.