Parent Unit - Alecto DVM-75 Manual Del Usuario

and sand.

3.2 PARENT UNIT:

Power supply:
The parent unit can be powered directly by the included
rechargeable battery or via the supplied power adapter. As
soon as you connect the power adapter, it will charge the
battery allowing for mobile use of the parent unit.
Battery:
1. Open the battery com-
partment by sliding off
the battery cover at the
rear of the unit.
2. Connect the battery
plug in the battery com-
partment according to the figure and install the battery.
3. Slide the battery cover back onto the parent unit.
Power adapter:
1. Connect the other 6V power adapter to the DC6V input
on the side of the parent unit.
2. Insert the adapter into a 230V wall socket.
8
Never connect the plug or install the battery
by force. Only install the supplied recharge-
able NiMH battery (3.6V, 800mAh).
Only use the supplied power adaptor with
model number S005BNV0600060.
You can recharge the battery with the pa-
rent unit either switched on or off, although
charging the battery with the parent unit
switched off will take less time.
- (Black) + (Red)