Alecto DVM-75 Manual Del Usuario página 49

Charging:
The battery will be charged as soon as you connect the
power adapter and insert it into a 230V wall socket.
• For initial use, charge the battery for at least 15 hours,
even if the indicator shows a fully charged battery.
• The charging circuit for the battery is managed electro-
nically and there is no risk of overcharging, this allows
you to leave the adapter connected at all times.
• In case you will not use the set for a longer period of
time (>2 months), please make sure to disconnect the
adapter from the wall socket and remove the battery
from the parent unit. When starting to use the set
again, make sure to properly charge the battery.
• Make sure nobody can trip or fall over the adapter ca-
ble. You can bundle cables that are too long with tape
or cables ties available specifically for this purpose.
Battery indication:
Upper part of the display: (only with the parent unit swit-
ched on)
• : no battery installed, parent unit is powered
directly through the adaptor
• : battery is full
• : battery is nearly empty
• >
Middle part of the display: (only with the parent unit swit-
ched on)
• : this symbol appears for several seconds every
minute in the last hour before the battery is exhausted.
Indicator
flashes in red: battery nearly empty
•
• continuous red: battery is being charged or kept on a
sufficient level
> >
on the parent unit:
: battery is charging
9