Alert Sounds On/Off; Switching Sound On/Off Automatically - Alecto DVM-75 Manual Del Usuario

Alert sounds on/off:

In case you've turned off the sound (volume at 0), but the
baby has been crying for over 1 minute, the baby monitor
can still alert you to these noises by sounding an alert tone
every minute.
1. Press the MENU button and use the
scroll to the
2. Use the
3. Press the MENU button to save your setting and to
leave the menu.
Switching sound on/off automatically: (VOX)
You can set the parent unit loudspeaker to turn off when
the baby is sleeping quietly and the baby unit is not detec-
ting any sound, and turning on again as soon as the baby
starts to cry.
Here you can set the trigger level for turning on the loud-
speaker:
1. Press the MENU button and use the
scroll to the
2. Use the
sensitivity level.
3. Press the MENU button to save your settings and leave
the menu.
4. On top of the screen you can see the level you just
selected:
• v1: low sensitivity, the speaker turns on only when
• v2 - v4: in-between-steps, we suggest to try the
• v5: maximum sensitivity, the speaker remains
14
and
illuminated in red: this function is enabled
illuminated in red: this function is disabled
and
loud sounds are being detected
best level in practice
switched on
option.
buttons to choose between:
option
buttons to decrease or increase the
or button to
or button to