Switching The Display On/Off Manually; Sound Indicators; Menu Operated Functions; Brightness - Alecto DVM-75 Manual Del Usuario

Switching the display on/off manually:

Briefly press the LCD ON/OFF button to turn off the
display. Press the LCD ON/OFF button again to turn the
display back on.
When the baby starts crying, the display is switched on
automatically.

Sound indicators:

To the left of the screen 4 sound indicators indicate
whether the baby is crying by starting to flash. In this way
you can monitor your baby also when the volume is set to
a low level or even turned off or when the baby monitor is
somewhat further removed in the room.

4.3 MENU OPERATED FUNCTIONS:

You can open the menu by pressing the MENU button.
Use the
the and
When finished, press the MENU button to save your set-
tings and to leave the menu.

Brightness:

1. Press the MENU button and use the
select the
2. Press the
the display brightness.
3. Press the MENU button to save your settings and
leave the menu.

Feeding timer:

As a reminder that it's feeding time, you may have the baby
monitor sound an alert after 2, 3, 4, 5 or 6 hours.
1. Press the MENU button and use the
scroll to the
2. Use the
illuminate in red and then press MENU
3. Now use the
hours until the next feeding time and press MENU
You may disable this function again by repeating these
instructions, but for step 2 you make the
nate in red.
12
or button to select the desired menu and use
buttons to adjust settings.
option.
and
option.
and buttons to make the
and
buttons to decrease or increase
buttons to set the amount of
or button to
or button to
option
option illumi-