Service And Repairs - DeWalt DCLE34021 Traducido De Las Instrucciones Originales

Ocultar thumbs Ver también para DCLE34021:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36

WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
If you need any assistance in locating any accessory, please
contact your nearest D
WALT service center or go to
e
www.D
WALT.com.
e
Target Card (Fig. N)
Some laser kits include a Laser Target Card to aid in locating and
marking the laser beam. The target card enhances the visibility
of the laser beam as the beam crosses over the card. The card is
marked with standard and metric scales. The laser beam passes
through the green plastic and reflects off of the reflective
tape on the reverse side. The magnet at the top of the card is
designed to hold the target card to ceiling track or steel studs
to determine plumb and level positions. For best performance
when using the Target Card, the D
facing you.

Service and Repairs

nOTE: Disassembling the laser level will void all warranties on
the product.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service
centers. Service or maintenance performed by unqualified
personnel may result in a risk of injury. To locate your nearest
STANLEY service center, go to http://www.sTanLEY.com.
Warranty
Go to www.2helpU.com for the latest warranty information.
WALT recommended
e
WALT logo should be
e
EngLIsh
33

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dcle34022

Tabla de contenido