Threading The Upper Thread - EASYHOME 07177 Manual Del Usuario

You can control when the sewing starts and stops using either the on/off switch
or the foot pedal
− Insert the foot pedal's DC connector into the foot pedal's DC connector terminal
on the sewing machine and place the foot pedal on the floor (see Fig. 1).
The sewing machine will start sewing when you press the foot pedal with your foot.
The sewing machine will stop sewing when you lift your foot off the foot pedal.

Threading the upper thread

• When selecting thread, please make sure that the thread is suit-
• If the sewing machine is delivered pre-threaded, make sure to
1. Place the sewing machine on a table or other level, dry surface.
2. Pull out the bobbin holder and remove the spring (see Fig. 1).
1
6
.
able for sewing machines. An unsuitable thread can quickly break
when sewing.
take a good look at the thread guide before changing the thread.
1
13
30 6
H T
L I G
First use
17
30
19