EASYHOME 07177 Manual Del Usuario página 24

First use
5. Lift the presser foot lever
6. Hold on to the upper thread and turn the handwheel
(see Fig. 6).
2
The needle
(using a loop) as it rises.
7. When this loop has been created, slightly pull on the upper thread and remove the
end of the lower thread with a needle or scissors.
The bobbin thread should now be pulled through the small hole in the throat
23 (see Fig. 7).
plate
24
5
28
28 to lift the presser foot (see Fig. 5).
6
will reach into the bobbin case and then pull out the lower thread
7
14
14
23
counterclockwise