EASYHOME 07177 Manual Del Usuario página 37

2. Hold the needle
turning it counterclockwise. If necessary, use tools for assistance. Then remove the
needle (see Fig. 3).
3. Insert the new needle fully into the needle holder
the flat side of the needle is aligned with the needle clamp screw (see Fig. 4).
4. Hold the needle firmly in place and tighten the needle clamp screw.
5. Lastly, operate the handwheel manually to check whether the sewing machine
can sew neatly.
Do not operate the on/off switch
been inserted correctly and until you have manually checked that the machine
can sew neatly.
3
2
firmly in place and loosen the needle clamp screw
4
17
25
20
2
25
20
2
25
. In doing so, make sure that
or the foot pedal
20
6
until the needle has
Operation
by
37