Troubleshooting - EASYHOME 07177 Manual Del Usuario

Troubleshooting

Troubleshooting
Problem
The sewing
1
machine
does not start.
The thread
tears.
There is a loop
in the stitching.
38
Possible cause
6
Foot pedal : The foot pedal is not
properly connected.
Battery operation: The batteries
have been inserted incorrectly or
are empty.
Electric operation: The pow-
7
er adapter is not properly
plugged into the power outlet or
the cord is not properly connected
to the sewing machine.
The power outlet is defective.
The upper/lower thread is not
threaded properly.
The upper/lower thread is tangled.
The tension of the upper thread is
too high.
The spool of thread or bobbin
was not put in place correctly.
2
The needle is bent or blunt.
The combination of needle size/
thread size/fabric is incorrect.
A wrong bobbin was used.
The thread tension is incorrect.
The presser foot
down.
4
3
21
is not pressed
Solution
Check the connection and
reconnect the foot pedal if
necessary.
Reinsert the batteries or
insert new batteries.
Check the connections and
connect the power adapter
properly if necessary.
Try another power outlet.
Check the power supply
fuse.
Rethread the thread.
Rethread the thread.
Reduce the tension using
the tension regulator for
the upper thread
Reposition the spool of
thread or bobbin.
Change the needle.
Change the needle or
thread.
Only use the supplied
bobbins.
Adjust the upper thread
tension.
Press the presser foot le-
28
ver down to lower the
presser foot.
11
.