Bosch GCM 12 PROFESSIONAL Instrucciones De Servicio página 30

Stationary or Flexible Mounting
To ensure safe handling, the electro tool
must be mounted on a flat and stabile
working surface (e.g., workbench).
Stationary Mounting
D1
Flexible Mounting
D2
Dust/Chip Extraction
Dust is generated while working that can be det
rimental to health, inflammable or explosive.
Suitable protective measure are required.
For example: Some types of dust are considered
to be carcinogenic. Use suitable dust vacuuming
and wear a dust protection mask.
Integrated Dust Extraction
E
33
External Dust Extraction
16
41
27
∅
English–8
Extending the Fence
F
Before all work on the machine, pull the mains
plug.
Ensure when extending or enlarging the
fence that the functionality of the electro
tool (especially of the swinging guard) is
not restricted.
22
Extending the Saw Table
Before all work on the machine, pull the mains
plug.
Saw Table Extension
G
21
Extension Hoop
H
42
Clamping the Work Piece
I
Before all work on the machine, pull the mains
plug.
When clamping the work piece, do not
reach with the fingers under the clamping
lever of the quick action clamp.
22
17
30
18
20
43
19
6
7
44
45