cecotec CONGA 1990 CONNECTED Manual De Instrucciones página 46

ENGLISH
Cleaning modes
- This robot includes different modes and different functions that can be activated from the
remote control or the App.
Automatic mode
- Press the power button for the robot to start Auto cleaning mode.
- The robot will clean the whole surface, edges, around objects such as tables, chairs etc.
Once it starts running out of battery, it will return to the charging base. Fig. 28
Scrubbing mode
- Attach the mop cloth to the water tank and fill the tank with water.
- Take the dust tank out.
- Install the water tank in the robot and turn it on. Fig. 29
- Use the remote control to select the desired scrubbing power level: High, Medium or Low.
- Once the scrubbing mode is selected from the remote control or the App, the device will
perform the function "All in One" to vacuum, mop and scrub at the same time thanks to its
Wet & dry tank.
- Note: If you want to sweep the floor, skip the water-filling step.
- To ensure perfect scrubbing from the start, it is suggested to dampen the mop cloth evenly
with water before use.
Spot mode
- The robot will carry out an intense cleaning of a specific area when this mode is activated.
The robot will start cleaning at a specific point and will move outwards performing spiral
movements (1 meter). Then, it will return to the starting point in spiral movements again.
-
Before operating the robot with spot cleaning mode, place it on the spot to be cleaned.
- Press the spot cleaning button on the remote control or on the App. Fig. 30
Edge mode
- When this mode is selected, the robot will clean along walls and around furniture (table or
chair legs, for example).
-
Press the edge cleaning button on the remote control or on the App. Fig. 31
Room mode
- The robot will carry out a 30-minute cleaning cycle when this mode is activated.
- Press the room cleaning button on the remote control or on the App. Fig. 32
- To ensure an efficient cleaning of the room, close the door or use the magnetic strip to
delimit the cleaning area.
Suction power level function
Press the power level button on the remote control or on the App in order to control the robot's
suction power during the cleaning process. There are 3 suction power levels: Turbo, Normal
and Eco. Fig. 33
46
05660_Conga 1990 Connected_IM_YV_0121085.indd 46 05660_Conga 1990 Connected_IM_YV_0121085.indd 46 6/8/21 13:08 6/8/21 13:08