Esoteric Grandioso T1 Manual Del Usuario página 15

7
Attach the arm base to the base unit.
Align a positioning indentation on the underside of the arm
base with the pin on the arm base post when installing it.
ATTENTION
o To ensure level installation, be sure to install the arm before
adjusting the height of the base unit.
o The arm base has 2 positioning indentations. Choose the
indentation according to the length of the arm.
9-inch arm positioning
indentation
12-inch arm
positioning indentation
The TA-9D tonearm is a 9-inch arm.
o When placed correctly, the tops of the arm base and the
arm base post should be almost the same height. If there is
a large height difference between the arm base and the arm
base post, the positioning indentation and the pin might not
be aligned. Try installing the arm base again.
Arm base post
Continued on the next page
8
Attach the tonearm to the arm base.
Refer to the owner's manual included with the tonearm and
install it.
Tonearm installed in the arm base
9
Attach the headshell to the tonearm.
e
15