Dimmer Setting - Esoteric Grandioso T1 Manual Del Usuario

Automatic display darkening setting
DPaOFF>***
Use this to set the display to darken automatically.
o By default, the setting is ON.
o If the OEL display is left on with the same indication for a long time,
brightness irregularities can occur. For this reason, we recommend
that you set the automatic display darkening function to ON.
ON
If no operation is conducted for ten minutes, the display automati-
cally turns off.
OFF
The display will not turn off automatically.
o If no operation is conducted for ten minutes, the display will
dim to DIMMER>1 brightness to protect it from excessive wear.
Automatic power saving setting
APS>***
The unit will automatically turn off if the platter has not rotated for the
set amount of time.
o By default, the setting is OFF.
OFF
The automatic power saving function is disabled.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes

Dimmer setting

DIMMER>***
Use this to adjust the brightness of the main unit's display.
o By default, the setting is 2.
DIMMER>3
c
DIMMER>2 (normal brightness)
c
DIMMER>1
c
DIMMER>0 (off )
o Even when set to DIMMER>1 or DIMMER>0, settings and error
messages will be shown with normal brightness (DIMMER>2).
Showing firmware versions
F/W ver.
Press the rotation speed adjustment (+) button when "F/W ver. " is
shown to check the firmware versions.
I/F ****
I/F firmware
MTR ****
Motor driver firmware
23