Teac AI-303 Manual Del Usuario página 20

Playing back music on a computer (continued)
Playing back audio files on a computer
1
Connect this unit to the computer using a USB cable.
o When a dedicated driver is necessary for connection, it must be
installed on the computer beforehand (page 19).
o Use a cable that has a USB Type-C connector for connecting to this
unit.
2
Turn the computer on.
o Confirm that the computer has started up correctly.
3
Press the standby/on (¤) button to turn the unit on.
4
Press the SOURCE button repeatedly to select USB.
5
Start playback of an audio file on the computer.
If you can adjust the volume from the computer, set it to its maxi-
mum level and use this unit's VOLUME knob to adjust the level for
the best audio quality.
o If you are using the TEAC HR Audio Player application, the vol-
ume cannot be adjusted from the computer.
20
USB cable