Designations In The Document; Safety; Intended Use; Important Safety Instructions - SMA SB3000TL-US-22 Manual De Instrucciones

2 Safety

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates a situation which, if not avoided, can result in property damage.
1.6

Designations in the Document

Complete designation
Communication assembly (CH-SBCOM31BG2-SP)
2 Safety
2.1

Intended Use

This spare-part set enables the replacement of the communication assembly (SBCOM) in SMA inverters.
The product must only be installed in the following SMA inverters:
Spare-part set
CH-SBCOM31BG2-SP
Use SMA products only in accordance with the information provided in the enclosed documentation and with the
locally applicable laws, regulations, standards and directives. Any other application may cause personal injury or
property damage.
Alterations to the SMA products, e.g., changes or modifications, are only permitted with the express written permission
of SMA Solar Technology AG. Unauthorized alterations will void guarantee and warranty claims and in most cases
terminate the operating license. SMA Solar Technology AG shall not be held liable for any damage caused by such
changes.
Any use of the product other than that described in the Intended Use section does not qualify as appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a convenient, dry place for
future reference and observe all instructions contained therein.
This document does not replace any regional, state, provincial, federal or national laws, regulations or standards that
apply to the installation, electrical safety and use of the product. SMA Solar Technology AG assumes no responsibility
for the compliance or non-compliance with such laws or codes in connection with the installation of the product.
If the replacement and all activities stated in this document are carried out by persons who are not qualified within the
meaning of this documentation, this will void the guarantee and warranty claims and in most cases terminate the
operating permit. SMA Solar Technology AG shall not be held liable for any damage caused directly or indirectly due
to such changes by unauthorized persons.
2.2

IMPORTANT SAFETY INSTRUCTIONS

Keep the manual for future reference.
6 CH-SBCOM31BG2-SBxx000TL-US-22-RM-xx-10
CAUTION
NOTICE
Designation in this document
Communication assembly, assembly
Assembly to be replaced
SBCOM31BG2-XX.XX
SMA Solar Technology AG
Inverters
SB3000TL-US-22
SB3800TL-US-22
SB4000TL-US-22
SB5000TL-US-22
SB6000TL-US-22
SB7000TL-US-22
SB7700TL-US-22
Replacement Manual