iRobot Roomba Combo j7 Guia Del Propietario página 12

Washing the Bin
Important: Do not wash the Filter.
Remove the Filter before washing
EN
the Bin.
1
Release the Bin, remove the Filter and
open the Bin Door.
2
Rinse the Dust Bin and Water
Tank using warm water.
Note: The Bin is not dishwasher
safe.
3
Make sure that the Bin is
completely dry. Reinsert the
Filter and place the Bin back
into the robot.
8 For more information, visit global.irobot.com
Cleaning the
Edge-Sweeping Brush
1
Use a coin or small screwdriver
to remove the screw holding the
Edge-Sweeping Brush in place.
Pull to remove the Edge-
2
Sweeping Brush. Remove any
hair or debris, then reinstall the
Brush.
Cleaning the Sensors, Camera
Window and Charging Contacts
1
Wipe Sensors, Camera Window and Pad Shelf with
a clean, dry cloth.
Inspect the Camera Window. If you notice any
Note:
cracks, please contact Customer Care.
Important: Do not spray cleaning solution or
water onto the Sensors or Sensor openings.