RadioShack 43-3547 Guía Rápida

www.radioshack.com
Connect the Phone
9V DC
TEL LINE
Insert the supplied AC adapter's barrel plug into the
9V DC jack, and its AC plug into a standard AC
outlet.
Plug one end of the supplied long modular phone
cord into the TEL LINE jack, and the other end into
a modular telephone line wall-jack.
Install and Charge the Handset Battery
Battery Pack
Connector
Cover
Before you can use your telephone, you will need to
install the handset battery. The battery will then need
to charge for at least 12 hours.
1. Remove the cover.
2. Plug the battery pack's connector into the socket.
The connector fits only one way into the socket.
Do not force the connector.
3. Replace the cover.
To charge the battery pack, place the handset on the
base. The IN USE/CHARGING indicator on the base
lights.
Q Q
Q Q
UICK UICK
UICK UICK
SM
f — press to move
through menu
options, or access
the Caller ID
history.
TALK / FLASH—
press to initialize
the line or perform
an electronic
switchhook
operation.
PROG / CHAN —
press to access the
settings menu, or
change to a clearer
channel if
interference is
experienced.
MEM — press to
enter a number into
a memory location,
or to dial a number
stored in a memory
location. See
"Memory Dialing"
on page 7 of the
Owner's Manual.
Setting Up the TeleZapper
1. Lift the handset, and press PROG/CHAN, then press f until
the screen displays
2. Press SELECT. The current option flashes.
3. Use f or g to choose
4. Press SELECT to activate the chosen option.
© 2003 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
S S
S S
TART TART
TART TART
2.4 GHz Cordless Phone
with CID & TeleZapper
SELECT— press to
choose between
menu options, or
finalize some
settings.
g — press to move
through menu
options, or access
the Directory.
OFF — press to
hang up, or exit
the settings menu.
HOLD— press to
put a call on hold.
REDIAL / PAUSE—
press to redial the
last number dialed
or to enter a pause
in memory.
TELEZAPPER:
, and its current setting.
BAS ADV OFF
(basic), (advance), or

Refer to your Owner's Manual for complete instructions.
Setting Menu Options
1. Press PROG/CHAN to access the settings menu.
f g
2. Use or to move between menu options.
3. Press SELECT to choose the desired option.
Making and Receiving Calls
1. To make a call, lift the handset and press TALK.
CONNECTING
appears briefly and PHONE ON appears on the handset's display,
and the IN USE/CHARGING indicator on the base flashes.
2. Dial the number. The number appears on the handset as you dial.
**RINGING**
When you receive a call,
handset and press any button except OFF.
display. To end a call, place the handset on the base or press OFF.
Using Redial
You can quickly dial the last number you dialed. Lift the handset and press
REDIAL, then . The phone dials the number.
TALK
Press REDIAL twice while the telephone is not in use to clear the redial
REDIAL EMPTY
memory. appears on the display.
Reviewing Caller ID History
For each call that comes in, the screen displays the following information
between the first and second rings:
• Your caller's name (15 letters are sent by your telephone company)
• The caller's area code and telephone number
• The time and date of the call
1. Press f to view call history.
.
2. Use f and g to scroll through records in call history. When you scroll past
END OF LIST
the last record, appears.
E E
NGLISH NGLISH
43-3547
appears. To answer the call, lift the
PHONE ON
appears on the handset's
Printed in China
04A03