Starting Automatic Cleaning Manually (Clean Programme); Sterilisation Programme (Sterilize Programme) - Medion MD 19888 Manual De Instrucciones

The automatic cleaning function is not available when the grinding
chamber (26) is inserted.
9.2. Starting automatic cleaning manually (Clean
programme)
Two cleaning programmes are available: quick cleaning and deep cleaning.
 Fill the water tank (4) with clean tap water up to at least the Cleaning Level
mark.
 Close the water tank (4) with the water tank lid (3).
 Close the mixing chamber (10) with the mixing chamber lid (1).
 Place the waste container (6) under the mixing chamber (10).
Clean programme
Quick cleaning
Deep cleaning
The function indicator (15) Clean flashes.
The cleaning time is shown on the display.
 Press the Start/Cancel button to start the cleaning programme.
The programme ends automatically after the time indicated in the table.
 Remove the waste container (6) and empty it.
 Wipe the surfaces of the appliance using a soft, slightly damp cloth.

9.3. Sterilisation programme (Sterilize programme)

Two sterilisation programmes are available: Sterilisation and Cleaning with
sterilisation.
 Close the mixing chamber (10) with the mixing chamber lid (1).
Sterilize programme
Sterilisation
Cleaning with
sterilisation
The function indicator (15) Sterilize flashes.
Button
Clean/Sterilize (17)
Press 1x
Press 2x
Button
Clean/Sterilize (17)
Press 3x
Press 4x
Cleaning time
8 minutes
30 minutes
Cleaning time
22 minutes
30 minutes
231
DE
FR
NL
ES
IT
EN