Medion MD 19888 Manual De Instrucciones página 235

Error code
E01
E02
E03/
E04
E05 E051
E052
E06 E061
E062
E07 E071
E072
E073
E08
E09
E10
236
Possible cause
Missing zero signal
The mixing chamber lid
is not closed.
Voltage fluctuations
Fault: Chamber
temperature sensor
Fault: Heating plate
temperature sensor
Short circuit of the
chamber temperature
sensor
Short circuit of
the heating plate
temperature sensor
Fault: Internal
connection of display
and power supply board
Fault: Internal
connection of display
and power supply board
Fault: Internal
connection of display
and power supply board
Motor without power
Motor is overloaded
Heating module failure
Troubleshooting
 Contact customer services.
 Check the mixing chamber lid
and close it.
 Wait and try again.
 Contact customer services.
 Contact customer services.
 Contact customer services.
 Contact customer services.
 Contact customer services.
 Contact customer services.
 Contact customer services.
 Wait 5 minutes and restart
the appliance. If the message
continues to be displayed,
contact customer services.
 Remove ingredients from
the mixing chamber (10) and
restart the appliance.
 Wait 10 minutes and restart
the appliance. If the message
continues to be displayed,
contact customer services.