Installation Dimensions - Klarstein VINOVILLA 17 DUO VILHELMINE Manual De Instrucciones

EN
28
Note on built-in appliances
• All appliances with ventilation slots on the front are suitable for installation,
but must not be installed in completely closed enclosures.
• Built-in appliances draw air in on the right side of the ventilation frame (some
models also on the back) and let it out again via the ventilation frame at the
front.
• Like many electrical appliances, the wine refrigerator has many sensitive parts
that can be damaged by a power failure or lightning strike. Your connections
should therefore be equipped with surge protection.
• If you install the appliance in a frame with a door, there must be a ventilation
opening at the bottom of the door. In hot climates, slots with a minimum
dimension of 40 mm x 200 mm must also be provided at the top of the rear or
at the top of both sides of the enclosure to allow cool air to enter. A minimum
of 30 mm space must be left to the rear wall of the frame. The ventilation slot
should not be placed on a side where another appliance, such as an oven, is
already located.

Installation dimensions