Ecler CA40 Manual De Usuario página 56

TALKOVER_ZONES <Input=I3:I6>
TALKOVER_THRESHOLD <Input=I3:I6>
TALKOVER_DEPTH <Input=I3:I6>
TALKOVER_ATTACK <Input=I3:I6>
TALKOVER_HOLD <Input=I3:I6>
TALKOVER_RELEASE <Input=I3:I6>
CHIME_MELODY <Input=I3:I6>
CHIME_VOL <Input=I3:I6>
XSELECT <Input=I1:I6>
XLEVEL <Input=I1:I6>
ZONE_LABEL <Zone=ZA:ZD>
ZONE_STEREO <Zone=ZA:ZD>
ZONE_MUTE <Zone=ZA:ZD>
ZONE_VOL <Zone=ZA:ZD>
GEQ_ACTIVE <Zone=ZA:ZD>
<Zones=ZA:ZD>
<Threshold=dBx10>
<Depth=dBx10>
<AttackTime=msx10>
<HoldTime=msx10>
<ReleaseTime=msx10
>
<ChimeMelody>
<Volume=dBx10>
<Zone=ZA:ZD> ON/OFF
<Zone=ZA:ZD> <Level=0:99>
"<Label>"
ON/OFF
ON/OFF
<Volume=0:99>
ON/OFF
56
Sets the current TALKOVER assignment to outputs (ZONES) for the
specified INPUT. Zones parameter can include ZA to ZD, separated by
comma characters and no blank space (example: ZA,ZC,ZD)
Sets the current TALKOVER THRESHOLD LEVEL (dBx10) for the
specified INPUT
Sets the current TALKOVER DEPTH (attenuation, dBx10) for the
specified INPUT
Sets the current TALKOVER ATTACK TIME (milliseconds x10) for the
specified INPUT
Sets the current TALKOVER HOLD TIME (milliseconds x10) for the
specified INPUT
Sets the current TALKOVER RELEASE TIME (milliseconds x10) for the
specified INPUT
Sets the current CHIME MELODY selected for the TALKOVER function
in PAGER mode
Sets the current CHIME MELODY VOLUME (dBx10) adjusted for the
TALKOVER function in PAGER mode
Sets the current CROSSPOINT SELECT status (ON (input active) or
OFF (input muted)) for the specified INPUT at the specified output
zone
Sets the current CROSSPOINT LEVEL (mix level) for the specified
INPUT at the specified output zone
Sets the current LABEL (name) for the specified output zone (between
quotation marks to allow for blank characters in the label)
Sets the current STEREO link status (ON or OFF) the specified output
zone
Sets the current MUTE status (ON or OFF) for the specified output
zone
Sets the current VOLUME for the specified output zone
Sets the current GRAPHICAL EQUALIZER status (ON or OFF) for the
specified output zone