Ecler CA40 Manual De Usuario página 60

TALKOVER_THRESHOLD <Input=I3:I6>
TALKOVER_DEPTH <Input=I3:I6>
TALKOVER_ATTACK <Input=I3:I6>
TALKOVER_HOLD <Input=I3:I6>
TALKOVER_RELEASE <Input=I3:I6>
CHIME_MELODY <Input=I3:I6>
CHIME_VOL <Input=I3:I6>
XSELECT <Input=I1:I6>
XLEVEL <Input=I1:I6>
ZONE_LABEL <Zone=ZA:ZD>
ZONE_STEREO <Zone=ZA:ZD>
ZONE_MUTE <Zone=ZA:ZD>
ZONE_VOL <Zone=ZA:ZD>
GEQ_ACTIVE <Zone=ZA:ZD>
GEQ_GAIN <Zone=ZA:ZD>
XOVER_ACTIVE <Zone=ZA:ZD>
<Threshold=dBx10>
<Depth=dBx10>
<AttackTime=msx10>
<HoldTime=msx10>
<ReleaseTime=msx10>
<ChimeMelody>
<Volume=dBx10>
<Zone=ZA:ZD> ON/OFF
<Zone=ZA:ZD> <Level=0:99>
"<Label>"
ON/OFF
ON/OFF
<Volume=0:99>
ON/OFF
<Band=B1:B10> <Gain=dBx10
>
ON/OFF
60
Shows the current TALKOVER THRESHOLD LEVEL (dBx10) for the
specified INPUT
Shows the current TALKOVER DEPTH (attenuation, dBx10) for the
specified INPUT
Shows the current TALKOVER ATTACK TIME (milliseconds x10) for
the specified INPUT
Shows the current TALKOVER HOLD TIME (milliseconds x10) for the
specified INPUT
Shows the current TALKOVER RELEASE TIME (milliseconds x10) for
the specified INPUT
Shows the current CHIME MELODY selected for the TALKOVER
function in PAGER mode
Shows the current CHIME VOLUME (dBx10) adjusted for the
TALKOVER function in PAGER mode
Shows the current CROSSPOINT SELECT status (ON (input active) or
OFF (input muted)) for the specified INPUT at the specified output
zone
Shows the current CROSSPOINT LEVEL (mix level) for the specified
INPUT at the specified output zone
Shows the current LABEL (name) for the specified output zone
Shows the current STEREO link status (ON or OFF) the specified
output zone
Shows the current MUTE status (ON or OFF) for the specified output
zone
Shows the current VOLUME for the specified output zone
Shows the current GRAPHICAL EQUALIZER status (ON or OFF) for
the specified output zone
Shows the current GAIN (dBx10) of one BAND (B1 to B10) of the
GRAPHICAL EQUALIZER for the specified output zone
Shows the current CROSSOVER FILTER status (ON or OFF) for the
specified output zone