INSTALLATION INSTRUCTIONS
2. Surface Mount
Insert the shelves (B) in the desired locations.
INSTALLATION INSTRUCTIONS
1. Recess Mount
Hold the cabinet (A) at the desired position on wall.
NOTE: Make sure the cabinet is level.
Trace the outline of the cabinet (A) on the wall.
NOTE: The cabinet should be positioned between
two studs. If the cabinet will not be positioned between
two studs, a frame of wood must be constructed in the
wall surrounding the outline of the location of
the cabinet.
2. Recess Mount
Cut a hole in the wall along the traced line.
IS0735
2
1
2
4
B
A
B
outline of the cabinet
A
cut out the outline
of the cabinet