SK magic ACL-25C1A Manual Del Usuario página 21

Press for 5 seconds
4. Assemble the All-in-One Care filter with the
Pre-filter.
CAUTION
Be sure to hold the product's body tightly
•
to prevent it from falling over.
5. Attach the front cover by hooking the cover
onto the product and lowering the cover
downwards to reattach it.
It is easier to assemble by attaching the
•
front cover's lower hooks first.
6. Turn on the product, and press and hold the
[Auto] button for at least 5 seconds. When
the beep sounds, the filter replacement
notification will turn off and the filter life
timer will be reset.
If the filter is replaced with a new
•
filter and you do not receive a filter
replacement notification, perform a
filter reset.
The filter replacement notification is a
•
function that applies only to the All-in-
One Care filter, and the Pre-filter does
not have a separate filter replacement
notification lamp.
21