SK magic ACL-25C1A Manual Del Usuario página 5

Do not install the product near an electric heater.
Doing so may result in fire.
•
Do not allow pets to bite the power cord.
Failure to do so may result in electric shock or fire.
•
Do not place electric appliances on the product, such as heaters and TVs.
Doing so may result in fire, electric shock, or malfunction.
•
Do not install the product in humid, dusty, or splashed water.
Doing so may result in electric shock, injury, or fire.
•
Do not use flammable gas or substances near the product.
Doing so may result in product cracking, electric shock, or fire.
•
This product is intended for home use and should not be installed or used in an automobile or
any other area with a shifting or unstable surface.
Doing so may result in injury or product damage.
•
Do not insert sharp objects, such as an ice pick, into the sensor.
Doing so may result in electric shock.
•
If you hear a strange sound, smell burning, or see smoke coming from the product,
immediately unplug the power cord and contact our service center.
Failure to do so may result in electric shock or damage.
•
If the leakage of explosive gas, such as isobutane, propane, or LPG, is detected in the place
where the product is installed, ventilate the area immediately without touching the product or
power cord.
Never immerse the product in water.
Doing so may result in electric shock.
•
Do not spray flammable substances, such as pesticides or air fresheners, on the air inlet.
Doing so may result in fire or deterioration.
•
Do not open, repair, or modify the product.
Doing so may result in electric shock, injury, or fire.
•
Please contact our service center for repairs.
•
Do not place water containers, chemicals, food, small metals, or flammable substances on the
product.
If any objects enter into the product, it may result in electric shock, fire, and damage.
•
If an object blocks the air outlet, the product may not operate normally, causing a
•
malfunction.
Disconnect the power cord before cleaning the product.
Failure to do so may result in electric shock or fire.
•
Do not spray directly with water or clean the product with benzene or thinner.
Doing so may result in electric shock or fire.
•
Do not put your fingers or foreign objects into the air inlet or air outlet.
Doing so may result in injury or product failure.
•
5