or similarly qualified persons in order to avoid a
hazard.
The appliance should not be placed immediately
below a socket.
WARNINGS: In order to avoid overheating,
do not cover the heater.
Do not use this heater with a programmer, timer,
separate remote control system or any other
device that turns on the heater automatically
because there is a risk of fire if the device is
covered or placed incorrectly.
CAUTION: To avoid hazard due to inadvertent
resetting of the thermal cutout, this appliance
must not be powered via an external switch,
such as a timer, or connected to a circuit that is
regularly switched on and off by the electricity
supplier.
This heater must not be disposed of with
household waste; it must be taken to a local
center of recovery and recycling of electrical
appliances.
The heater must be installed so that switches
and other control devices can not be
a person in the bath or shower.
A means of disconnection from the power supply
having a contact opening distance of all poles
must be included in the fixed wiring in
accordance with the installation requirements.
If being fitted in a bathroom, a 30mA RCD must
be used.
3
touched by