auna MC40 DAB Manual De Instrucciones página 39

Manual DAB scanning
1. Turn on the unit and select DAB mode
2. Press MENU button on the remote control to access the menu control.
3. Press the ⏮ or ⏭ button until "MANUAL" is displayed and then press the
ENTER button.
4. Press the ⏮ or ⏭ button to select the desired channel (Example: 5A-13F).
5. Press the ENTER button to confirm.
6. To select another channel (Example: 5A-13F), press the ⏮ or ⏭ button
and then press the ENTER button to confirm.
7. To quit manual scan, press the MENU button on the remote control.
Tuning
Press the TUNE  or TUNE  button to display the information of the next
station. Then press the ENTER button to tune to this station in few seconds.
Storing DAB Presets
You can save up to 20 DAB stations.
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button to access the menu control. Flashing
"PROG" is displayed
3. Press the TUNE  or TUNE  button to a preset number that you want
to store. Then press the ENTER button to save.
Stored DAB Presets
Press the CH- or CH+ button directly tune to the preset channel.
Displaying DAB Station Information
There are several types of information as listed below. To change the
display information, press the INFO button repeatedly.
1. Radio Text scrolling: Comprises music titles or programme details
provided by the broadcaster.
2. Signal Bar: Reception signal level. The more the star mark is displayed,
the stronger the signal is received. To improve the reception adjust the
wire antenna position.
3. Program Type (PTY): Type of program provided by the Radio station.
4. Multiplex Name: Displays name of multiplex to which the current station
belongs.
5. Frequency: Current channel frequency.
EN
39