Input Connection - Sony XM-1ES Manual De Instrucciones

Input Connection

The INPUT connector can be used by both low-level
input and high-level input.
Making low-level input connection
Set the INPUT VOLTAGE switch to "LOW" and
connect the RCA cable (not supplied) from your car
audio to the INPUT connector.
INPUT
VOLTAGE
LOW HIGH
* RCA cable (not supplied)
Making high-level input connection
Set the INPUT VOLTAGE switch to "HIGH" and use a
speaker-wire-to-RCA adaptor (not supplied) to
connect the speaker wire from your car audio to the
INPUT connector.
*
INPUT
VOLTAGE
LOW HIGH
* Speaker wire-to-RCA adaptor (not supplied)
12
GB
*
Speaker output (left)
Speaker output (right)
The following shows the connection and settings
typically used when connecting a car audio unit and
this amplifier. Refer to the operating instructions
supplied with your car audio for more details about
the input connection for your car audio unit.
 Connection for 1-channel input
With "Speaker Connection" (page 13)  or .
INPUT MODE
+
1 1 2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE switch
to the "1" position.
 Connection for 2-channel input
With "Speaker Connection" (page 13)  or .
INPUT MODE
+
1 1 2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE switch
to the "1+2" position.
AUDIO OUT
*
AUDIO OUT
*