DeWalt DXAEOBD Manual De Instrucciones página 9

temperature (hot or cold), whether the battery is damaged or defective,
and whether the D WALT 20V Battery Pack is fully charged.
®
e
The D WALT Vehicle Battery Charger requires a minimum voltage
®
e
to detect the correct connection before it will begin to charge. If the
voltage of the vehicle battery is too low, the charger may not be able
to detect connection and may not be able to charge the vehicle. While
this low battery voltage is rare, it may occur under extreme conditions.
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE
Components (Fig.1)
A. Charge Status and Fault Indicator
B. OBD-II Charging Cable & Plug
C. OBD-II Plug Dock
8