The Sequence Of Audio Files On The External Storage Device (Usb, Sd); Ipod; Ipod Compatibility; About Handling The Ipod - Pioneer DEH-P4100SD Manual De Instrucciones

Reproductor de cd con receptor rds
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Additional Information
The sequence of audio files on the
external storage device (USB, SD)
For USB portable audio players, the sequence is
different from that of the other external storage
device and depends on the player.
! 01 to 05 represent assigned folder num-
bers. 1 to 6 represent the playback se-
quence. The user cannot assign folder
numbers and specify the playback se-
quence with this unit.
! Playback sequence of the audio file is the
same as recorded sequence in the external
storage device (USB, SD).
! To specify the playback sequence, the fol-
lowing method is recommended.
1 Create the file name including numbers
that specify the playback sequence (e.g.,
001xxx.mp3 and 099yyy.mp3).
2 Put those files into a folder.
3 Record the folder containing files into the
external storage device (USB, SD).
However, depending on the system environ-
ment, you cannot specify the file playback
sequence.
! Up to 15 000 files in an external storage de-
vice (USB, SD) can be played back.
! Up to 500 folders in an external storage de-
vice (USB, SD) can be played back.
! Up to eight tiers directory in an external
storage device (USB, SD) can be played
back.

iPod

iPod compatibility

! This unit supports only the following iPods.
Supported iPod software versions are
shown below. Older versions of iPod soft-
ware may not be supported.
— iPod nano first generation (software ver-
sion 1.3.1)
— iPod nano second generation (software
version 1.1.3)
— iPod nano third generation (software
version 1.1.2)
— iPod fifth generation (software version
1.3.0)
— iPod classic (software version 1.1.2)
— iPod touch (software version 2.0)
— iPhone (software version 2.0)
— iPhone 3G (software version 2.0)
! Operations may vary depending on the soft-
ware version of iPod.
! When using an iPod, iPod Dock Connector
to USB Cable is required.
! Pioneer CD-IU50 interface cable is also
available. For details, consult your dealer.
! This unit can control previous generations
iPod models with a Pioneer iPod adapter
(e.g. CD-IB100N).
For details concerning operation with the
iPod adapter, refer to Playing songs on iPod
on page 35.

About handling the iPod

! Do not leave the iPod in direct sunlight for
extended amounts of time. Extended expo-
sure to direct sunlight can result in iPod
malfunction due to the resulting high tem-
perature.
! Do not leave the iPod in a high tempera-
ture.
! Connect directly the dock connector cable
to the iPod so that this unit works properly.
! Firmly secure the iPod when driving. Do
not let the iPod fall onto the floor, where it
may become jammed under the brake or
accelerator pedal.
! For details, refer to the iPod's manuals.

About iPod settings

! When an iPod is connected, this unit
changes the EQ (equalizer) setting of the
iPod to Flat in order to optimize the acous-
tics. When you disconnect the iPod, the EQ
returns to the original setting.
! You cannot set Repeat to off on the iPod
when using this unit. Even if you set Repeat
to off on the iPod, Repeat is automatically
changed to All when connecting the iPod
to this unit.
Appendix
55
En

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Deh-p3100ub

Tabla de contenido