Ferroli BLUEHELIX HITECH RRT K 50 Instrucciones De Uso, Instalación Y Mantenimiento página 275

BLUEHELIX HITECH RRT K 50
Indication during operation
Heating
A heating request (generated by the Room
Thermostat or Remote Timer Control) is in-
dicated by the flashing radiator symbol.
When the burner is lit, the flame symbol ap-
pears and the 3 levels indicate the actual in-
tensity.
DHW (domestic hot water)
A DHW request (generated by the hot water
tank probe) is indicated by the faucet icon
flashing.
When the burner is lit, the flame symbol ap-
pears and the 3 levels indicate the actual in-
tensity.
Comfort
During Comfort mode (hot water tank temperature restoring) the flame symbol appears and the
faucet flashes.
EN
cod. 3541Z782 — Rev 00 - 10/2022
1.2
bar
29
°C
27
°C
fig. 2
1.2
bar
29
°C
27
°C
fig. 3
275