Before You Begin
CAUTION: Risk of personal injury or product damage. Handle with
care. Product can break, chip, or cause injury if handled carelessly.
CAUTION: Risk of personal injury. Turn on the water and allow water
to flow through the supply pipe to flush the system of any debris before
connecting fill valve.
Observe all local plumbing and building codes.
Prior to installation, unpack the new lavatory and inspect it for damage.
Return the product to its protective carton until you are ready to install it.
Use the template supplied with the product.
Failure to follow these precautions may result in a poor installation.
If the existing toilet does not have a supply shut-off valve below the tank,
install one before installing the new toilet.
Fixture dimensions are nominal and conform to tolerances established by
Standards TIS 792-2554, ASME/CSA A112.19.2/B45.1, GB6952-2015,
AS1172.1-2014, BS:EN 997-2012, MS1552:2011, SS 574:2012, SNI 03-0797:
2006, PNS 156:2010 and SASO-1473-2016.
For Australia and New Zealand: Installation shall be in accordance with
AS/NZS 3500 and AS/NZS 6400.
Tools
1290970-GL2-B
4
Kohler Co.