Tools And Materials; Before You Begin - Kohler K-4830 Guia De Instalacion

Tools and Materials

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes
to review this manual before you start installation. If you encounter any
installation or performance problems, please don't hesitate to contact us. Our
phone numbers and website are listed on the back cover. Thanks again for
choosing Kohler Company.

Before You Begin

CAUTION: Risk of personal injury or product damage. Handle with
care. Vitreous china can break or chip if the bolts and nuts are
overtightened, or if the product is handled carelessly.
Observe all local plumbing and building codes.
Carefully inspect the new bidet for damage.
The bidet must be installed with 3/8" hot and cold shut-off valves.
Refer to the roughing-in book for dimensional information.
Site preparation may require additional tools and hardware.
1. Preparation
Turn the water supply off.
Install the hot and cold water supplies, shut-off valves, and trap outlet as
necessary to conform to roughing-in dimensions.
The trap can be installed in the drain line below or above the floor.
1010409–2–B 2 Kohler Co.