universalblue UCVT9301-20 Manual De Instrucciones página 21

This appliance has 4 different positions:
• 0 position or OFF position.
• Fan position.
• Position I hot air.
• Position II hot air, for the maximum hot possible.
To operate your appliance, please follow below instructions.
1. Plug the heater considering the voltaje (230 V)
2. Set the rotary switch to maximum speed to quickly warm the.
Once the room is at the desire temperature, select a lower
setting to reduce electrical consumption and avoid a very hot
room.
3. Adjust the thermostat to maximum and select the desired
power setting. Once the room is comfortable, rotate the
thermostat counterclockwise, until the heater shuts off. The
thermostat will now maintain the temperature by cycling the
heater on or off. During particularly cold weather, the low
power setting may be insufficient to satisfy the thermostat.
Select a higher setting for these periods.
4. Before switching off the appliance will for 5-10 second in
cool conditions. After that the appliance will be switched off.
21