Cleaning And Maintenance - Klarstein BARZONA 2 Manual Del Usuario

EN
16
Damper adjustment: the normal and good performance flame should be blue with
very small yellow flame at the flame tip. If you find the flame is too much yellow,
you can adjust the valve damper to get the desired flame.
Adjust the flame
of the outer
burner cap.
Clockwise
for big flame
counter clock for
small flame
Note: the damper has been set by the producer, it is not recommend the user
to adjust it by themselves. Ask qualified technician or installer to adjust the
damper ifIt is really necessary.
Flame out: turn the knobs clockwise to"off" position as drawing 3 shows, the flame
will be extinguished, then close the main gas valve.

CLEANING AND MAINTENANCE

1. Surface and trivet maintenance: wipe the glass surface & trivet by dishcloth,
which with medium scour, then dry thoroughly with a dry cloth.
2. Burner cap maintenance: in order to keep good burning condition, it is better
to clean the burner cap by brush ( or other tools) weekly.
Adjust the flame
of center burner
cap.
Clockwise for
big flame–
counterclock-
wise for small
flame