Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Packing the washing machine
Unpacking the washing machine
Warning!
•
Packaging material (e.g. Films, Styrofoam) can be
•
There is a risk of suffocation ! Keep all packaging
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Installation area
Warning!
•
Stability is important to prevent the product from
wandering!
•
Make sure that the product should not stand on
the power cord.
Before installing the machine, the location characterized
as
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0 C
5.Keep far away from the heat resources such as coal or gas.
dangerous for children.
well away from children.
9
L
w
W> 20mm L> 45mm
Publicidad
Tabla de contenido
Solución de problemas
