How to Assemble for Juicing
1. Place Strainer Bowl on top of
the Motor Base. Then place
Stainless Steel Strainer Basket
inside Strainer Bowl.
5. Place Pulp Bin into position by
tilting Bin slightly.
Strainer Basket
2. With hands on outer edge,
press Strainer Basket down
firmly into position.
6. Place Blending Jar or other container under Juice Spout, ensuring Spout is turned
down into the Blending Jar. Slide Food Pusher down Feed Chute by aligning groove in
Food Pusher with small ridge on the inside of top of Feed Chute.
Before first use: After unpacking the Juice & Blend,
remove cardboard from Strainer Basket and wash
everything except Base in warm, soapy water. Rinse
and dry immediately. Never immerse the Base in water
or other liquids; wipe it with a damp sponge.
3. Place the Juicer Cover over
Strainer Bowl, centering Feed
Chute over the Strainer Basket,
and lower into position.
Small ridge
inside Feed
Chute
4. Raise Locking Latches up to
lock Cover into place. Juicer
Icon ( ) should face outward.
HINT: To minimize cleanup,
place 100% compostable bag or
plastic grocery bag in Pulp Bin to
collect pulp. (See page 6 for more
information.)
5