Blower Function; Care And Maintenance; Warranty Conditions; Filter Cleaning - Ribimex PRCEN010IT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Connect the metal hose Q to its fitting C .
Connect the metal straight lance R.
Before vacuuming the ash, check that it is cold and
no longer alight.
Do not vacuum burning embers
Do not empty the drum into a container which is
easily inflammable and make sure that the ashes
are completely cool.
If the metal hose becomes hot during use, turn the
device off immediately and let it cool.
Turn the appliance on using the (I)ON switch, loca-
ted on the cover of the motor.
Vacuum the ash directly from the fireplace or
from the stove (wood or pellet-burning). Hold the
suction nozze about 1 cm. above the ash.

BLOWER FUNCTION

Insert the suction pipe into the upper hole on the
bin and tighten securely. In this way, the blowing
function of the product can be used.
USAGE
WET & DRY VACUUM CLEANER
Be sure that switch is in off position OFF and con-
nect the machine to a suitable socket.
The machine must be always kept on horizontal
bases, in a safe and stable way.
Insert the suitable filters for the proper use.
Never use the appliance without filters .
IMPORTANT: Clean the filter from time to time in
order to ensure that the vacuum cleaner continues
to perform optimally (and environment).
Use the most suitable accessories for the requsted
usage.
Put switch on ON position in order to start the
machine.
When job is over, switch off OFF and keep away
the plug from the socket.

FILTER CLEANING

The machine shall be disconnected from its power-
source, by removing the plug from the socketout-
let, during cleaning or maintenance
1- Remove the filter (N/O/P)
2- Shake the filter (N/O/P)
3- wash tge filter (N/O/P)
Let the filter drying very well ,befor reassemble it
Once the filter has been cleaned, check whether it
is suitable for further use. If it has been damaged
or broken, replace it with an original filter.
N
O

CARE AND MAINTENANCE

The unit is maintenance-free.
The machine shall be disconnected from its power
source, by removing the plug from the socket-out-
let, during cleaning or maintenance
Clean the exterior part of the machine with a dry
cloth.
Move the appliance only by catching the carrying
handle located on the motor head.
Store the appliance and the accessories in a dry
safe place, out of the reach of children.

WARRANTY CONDITIONS

All our machines are subjected to strict tests and are
covered against manufacturing defects in accordance
with applicable regulations. The warranty is effective
from the date of purchase.
The following are not included in the warranty:
parts subject to normal wear, rubber parts, charcoal,
filters and the accessories and optional accessories.
Accidental damage, caused by transport, neglect or
inadequate treatment, incorrect or improper use and
installation failing.
The warranty shall not cover any cleaning operations
to which the operative components may be subjected,
such as clogged nozzles and filter blocked due to
limestones. This cleaner is intended to be
used for domestic and hobby work: the warranty
does not cover any other different kind of use.
P

Publicidad

Tabla de contenido
loading

Tabla de contenido