en - Areas of application
64
Filters
The wash water used for reprocessing loads with narrow lumens
needs to be filtered.
The injector manifold must be fitted with an A 800 tubular filter.
The tubular filter is supplied with its own operating instructions.
Follow the instructions on how to perform regular cleaning on the
tubular filter.
An FP 20 filter plate can be inserted into the holder instead of the tu-
bular filter.
Do not insert a filter plate into the holder if the injector manifold has
been fitted with an A 800 tubular filter.
Some injector manifolds (those with silicone adapters, for example)
cannot be fitted with a tubular filter. In such cases the holder must al-
ways be fitted with an FP 20 filter plate.