Extended Menu - Televes ASI-COFDM Manual De Instrucciones

User manual

5.2.- EXTENDED MENU

By pressing the key for more than three
seconds, you can access a series of options
that are less frequently used and that are
called extended menus.
a. Configuration menu
This menu allows the selection of the follo-
wing configuration parameters:
- The address of the unit (to be controlled
through a CDC) (Option NOT available).
- The output frequency steps with options
125 KHz or 166KHz.
- The table of channels that you want to
use or either the operating mode per fre-
quency.
CONFIG
CDC Adr: 001
Skip: 125KHz
Frequency
The available channel tables to select from
are:
- CCIR, New Zealand and Indonesia.
- China & Taiwan
- Chile M/N
- Italy
- France
- URSS and OIRT
- Ireland
- South Africa
- Poland
To carry out a modification the
be pressed until the desired parameter flas-
hes. Then the correspondent parameter can
be modified by pressing and
35
b.- Temperature Menu
The following menu offers an indication of
the current unit temperature as well as the
highest recorded.
TEMPERATURE
Now:
Max:
It is possible to reset the maximum by pres-
sing the key.
The recommended operational margins are
key must
the following:
Optimal: 0-6
.
High temperature: 7-8
Excessive temperature: 9-10
In the event that the maximum recorded is
out of the optimal range, the set-up of the
device should be altered to try and reduce
the temperature. To verify whether this chan-
ge has been effective, reset the maximum
and check its value after a period of time.
ASI-COFDM
03
04
reset