Parameters Saving - Televes ASI-COFDM Manual De Instrucciones

User manual
c.- Versions Menu
This menu shows the user the unit firmware
and COFDM modulator versions available.
VERSIONS
Unit:
1.01
FPGA: 1.20
d.- Language Menu
The last extended menu allows the selection
of the menus
(English/Spanish/German).
LANGUAGE
English
By pressing or you switch between
different languages.

5.3.- PARAMETERS SAVING

Once a parameter is modified to the desired
value in any menu (normal or extended), to
save the settings press
The display will show the following indica-
tion:
Saving
setting and
restarting
...
If the configuration paremeters are modified
but not saved the previous configuration is
retrieved after 30 sec. in other words the
language
changes are discarded.
Finally, the LEDs indicate the following opera-
ting conditions:
- Left LED (A) = Active ASI input
- Central LED (B) = Sufficient output bit rate
to accommodate the entry
- Right LED (C) = Lock of the COFDM modu-
lator.
The LEDs that are illuminated indicate correct
operation. If any of them go out, this is an
indication of faulty behaviour.
for three seconds.
36
ASI-COFDM