Wall Mount; Desktop Installation - Grandstream GHP620/W Guía De Instalación Rápida

GHP620/W & GHP621/W DESCRIPTION:
Front panel
Flash
Speaker
Volume Down Key
Message
Note: The LED for the message waiting indicator will flash in green when
there is a message waiting.
Back panel
Power
LAN Port
Handset Port
Message Waiting
Indicator
Softkeys
Alphanumeric
Keypad
Redial
Hold
Volume Up Key
Mute
Mute Indicator
USB Type-C
Port
Wall Mount Stand
Slots
~ 3 ~
PHONE SETUP:

Wall Mount

1. On the wall where the GHP620/W & GHP621/W will be mounted, mark two
dots with 100mm distance in between vertically.
2. Using a drill, make a hole on each marked dot. Put a plastic expansion bolt
and screw (not provided) into each hole. Leave enough space on the screws
to mount the GHP620/W & GHP621/W.
3. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
4. Mount the GHP620/W & GHP621/W on the screws using its "Wall Mount
Slots".

Desktop Installation

For installing the phone on the table with the phone stand, attach the phone
stand to the bottom of the phone where there is a slot for the phone stand.
INSTALLING THE FACEPLATE:
1. Remove the release
paper from the back
of the faceplate.
2. Stick the faceplate on
the indicated area.
Please refer to the
illustration on the
right.
Wall
Desktop
~ 4 ~
100 mm