Adjusting The Saw Blade Speed - HOLZMANN MASCHINEN BS712TURN Instrucciones De Servicio

15.6 Adjusting the saw blade speed

HOLZMANN MASCHINEN GMBH
BS712TURN
WWW.HOLZMANN-MASCHINEN.AT
• Loosen lock bolt (1) holding to swivel disc
and turn the stop bolt (2) over.
• Swive saw body to right side and use scale
to set the angle at 45°.
• Tighten lock nut (1).
Swivel cutting angle to -45°
1. Loosen and take off three lock bolts holding
the vise (see picture 1&2).
2. Move the vise to locking position at right
side and retighten three bolts at new
position (see picture 3 &4)
3. Loosen lock bolt (1) holding the swivel disc
and turn the stop bolt over (2).
4. Swive saw body to right side and use scale
to set the angle at 45°.
5. Tighten lock nut (1).
1. stop machine and wait for standstill
2. open the V-belt cover
3. loosen the V-belt tension:
To do this, loosen the motor fixing screws 4 pieces (1).
Loosen the belt tension with tensioning screws (2)
and select the desired saw blade speed by turning
the belts according to the diagram and re-establisch
the V-belt tension.
4. close the V-belt cover again
35
BS 712TURN; BS712TURN-G