Changing The Saw Blade; Cleaning; Disposal - HOLZMANN MASCHINEN TK 305 Manual De Intrucciones

16.3

Changing the saw blade

 Never wear gloves during operation
 Except for replacing saw blades or handling rough material before
1 Fix the mitre saw in the uppermost position
2 Loosen with the blade key the
fastening nut of the saw blade
3 Replace the saw blade
4 Attach the new blade again with the fastening nut
16.4

Cleaning

After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do
not remove them by hand (cutting injury!). Remove dust as well.
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
16.5

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
HOLZMANN MASCHINEN GmbH
operation.
www.holzmann-maschinen.at
N O T I C E
N O T I C E
MAINTENANCE
46
TK 305