Adjusting The Sound; General Settings - Psm - JVC KD-ADV5380 Manual De Instrucciones

Adjusting the sound

1
2
Adjust the level.
BAS * 1 (bass)
Adjust the bass.
TRE *
1 (treble)
Adjust the treble.
FAD * 2 (fader)
Adjust the front and rear speaker
balance.
BAL (balance)
Adjust the left and right speaker
balance.
LOUD *
1 (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
VOL.A *
3 (volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
VOL (volume)
Adjust the volume.
*
1 When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (C-EQ) including "USER."
* If you are using a two-speaker system, set the fader
2
level to "00."
*
3 You cannot make an adjustment for FM. "FIX"
appears.
*
4 Depending on the amplifier gain control setting. (See
page 29 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
(except "SID") listed in the table on pages 28 and 29.
1
Enter the PSM settings.
–06 to +06
2
Select a PSM item.
–06 to +06
R06 to F06
3
Select or adjust the selected PSM item.
L06 to R06
LOUD ON or
4
Repeat steps 2 and 3 to adjust other
LOUD OFF
PSM items if necessary.
5
Finish the procedure.
–05 to +05;
initial: 00
00 to 30
(or 50) *
4
Continued on the next page
SETTINGS 27