Energy Saving Mode; Cleaning And Maintenance - Flama 1256FL Manual De Instrucciones

Cooling the machine after using the
steam/milk frothing function
After using the steam function, the
temperature of the machine increases
significantly and all the components will
be very hot. The 2 lighted single coffee and
double coffee indicators will begin to blink
quickly, indicating that the temperature of
the water circuit is too high and must cool
down.
To normalize the temperature of the water
circuit, follow these steps:
Place a container under the steam wand.
Rotate the steam adjustment knob to the
steam/water (
machine dispenses water for a few seconds.
When the lighted indicators begin blinking
slowly, rotate the steam adjustment knob
to the CLOSED (
When the lighted indicators become
steady, the water circuit temperature has
normalized and coffee may be dispensed.

Energy saving mode

The machine has an "auto shut-off"
function to automatically turn itself off
after 25 minutes of inactivity and reduce
energy consumption.
To reactivate the machine, press the ON/
OFF button.
SECRETS FOR A GOOD COFFEE
Preheat the portafilter, filter and mug.
Use high-quality water.
Use high-quality coffee with the appropriate
grind – "espresso grind coffee".
Since coffee is a natural product, its flavor
varies according to its origin, blend and
) position so that the
) position.
roast. Try different types of espresso grind
coffee until you find one that best suits your
personal taste.
After opening a package of coffee, store it
in the refrigerator in an airtight container.
Use the correct quantity of coffee in the
filter and appropriate tamping.
Small variations in the dose of coffee and the
grind, as well as stronger or softer tamping,
can all cause variations in the intensity and
aroma of your espresso coffee.
The greater the quantity of coffee, the
finer the grind and the more firmly tamped
it is, the slower the coffee will pour out
from the machine. If the coffee pours out
of the portafilter very quickly, you should
substitute the coffee for one with a finer
grind.

CLEANING AND MAINTENANCE

Cleaning
Unplug the coffee machine and allow it to
cool completely before cleaning.
Do not use abrasive cleaning products or
sponges, as these can damage the surface
of the appliance.
Do not immerse the body of the coffee
machine in water or any other liquid.
Remove the portafilter from the coffee
machine and empty the coffee residue from
the filters. Afterwards, clean the portafilter
with water and a cloth. If you detect ground
coffee or any other substance inside the
portafilter, rinse the inside of the portafilter
with abundant running water.
The portafilter is not dishwasher safe.
Regularly wash the water tank, the drip
tray, the cup rack and the filters with warm
water and dish detergent. Rinse well to
English
21