Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
No coffee comes
out.
No steam comes
out.
The coffee is too
smooth.
Coffee not
properly brewed.
The appliance is
not frothing the
milk well.
The coffee
buttons flash
very quickly.
All buttons on
the panel flash.
PROBABLE CAUSE
There is no water in the tank
or it is not installed. The
machine has not warmed
up.
The steam tube is blocked.
The steam selector is not in
the correct position or the
preheating process is not
complete.
The coffee is not ground
sufficiently or not pressed
well.
Too much or too little coffee
in the filter.
The milk used is not suitable
for this function. The steam
function
was
before
the
illuminated.
The
temperature
significantly after using the
steam function.
Indication for cleaning the
water circuit.
Fill the water tank and switch on the
appliance.
It is necessary that the machine is hot
before brewing coffee.
Use a thin wire to introduce through
the steam tube and clean the inside
after each use.
Turn the steam selector to the steam
position and wait for the preheating
process to complete.
Use another type of ground coffee or
the doser/presser to press the coffee
better.
1 coffee requires 1 teaspoon of coffee
and must be pressed well. The coffee
should not be too ground or too thick.
Coarse ground coffee is difficult to
extract and too fine ground coffee will
affect the quantity and quality of the
coffee.
Use whole milk.
activated
Steam can only be used when the
indicator
steam indicator light stops flashing.
rises
Allow the machine to cool down.
Proceed as described in the chapter
"Cleaning mineral residues/descaling"
English
SOLUTION
23
Publicidad
Tabla de contenido
