General Functions - DCU Tecnologic 34159030 Manual De Instrucciones

ENG
5.2 Register and login in.
Creating a user account and login: follow the steps in the
APP to register and login in, select the language and
location. Attention: Use the parent email to sign up.
5.3 Pair with the device.
After registration, to pair the APP with the Smartwatch,
scan the QR code that will be found on the watch.
Please note: the registration code is a 15-digit QR code,
not the barcode.
After you have paired the Smartwatch, you will enter to the
main interface of the APP.
Tip: After your account is linked to the Smartwatch, you will
be the administrator, if other phones or accounts wish to be
linked to the watch, the account you're using will receive a
notification request for authorization.
PLEASE NOTE THAT: with the same email you can only
create one account in the APP, but you can connect more
than 1 watch to the account and the same watch can be
associated with several accounts (father, mother, etc.).

6. GENERAL FUNCTIONS

· Location: GPS +AGPS+ LBS +WIFI Location real time on Map.
· Trace: Find the trace in APP.
· Safety area: Set fence (safety area) in the device (Max 3 fences),
And notify you in APP when watch wearer reach or out of the
appointed area.
· Weather: Automatically update the weather of local region. In
primary page just slide from the bottom of screen to enter the
weather quickly.
· Contact: Setting up maximum 15 members of your friends or
relative in APP.
· Dial interface: Dial interface is supported. You can turn on or off
this function in switch settings of APP.
· SOS: 3 emergency contacts can be set. Press the SOS BUTTON
(The button on some models is the power button) for 3 more
seconds and it will make an emergency call to the appointed
contacts in turns. If there is no one answering, it will continue to
dial twice in turns and stop.
16 16