Canon imageFORMULA DR-S150 Guia De Instalacion página 4

STEP 4 Choosing How to Connect to a Computer
The scanner supports Wi-Fi connection, wired LAN connection and USB connection.
Wi-Fi
Connecting via
Connecting via
Connect the scanner to the same network as the computer.
IMPORTANT
• The computer needs to be connected to the router via Wi-Fi or wired LAN.
• The router and LAN cable are not included, and must be provided
separately.
Hint
• The scanner supports DHCP (Dynamic Host Configuration Protocol).
A DHCP server in the network environment provides IP addresses
that can be automatically acquired, eliminating the need to specify an
IP address for the scanner.
• If you must specify a fixed IP address for the scanner, such as when
using it on a network without a DHCP server, you can specify a static
IP address on the touch panel. Refer to User Manual stored in the
supplied Setup Disc.
STEP 5 Turning the Power ON
The power button lights blue when the
power turns ON.
STEP 6 Selecting the Language
Tap the language you want to use.
Tapping the ▲ ▼ buttons scrolls the list up
and down.
Select a language.
English
日本語
Deutsch
Français
2
6T3-0057-02.indb 2
Connecting via
wired LAN
STEP 7
Tap the connection mode you want to use.
Power button
Shared Folder
wired LAN
Connecting via
Connecting via
Use the included USB
cable to connect to the
computer.
Selecting the Connection Mode
Select a connection mode.
Connect with USB cable
Connect with Ethernet cable
Connect via Wi-Fi
When using USB or wired LAN connection,
the home screen is displayed.
Home
CaptureOnTouch Settings Shared Folder
This completes setup.
USB
USB
When using Wi-Fi
connection, proceed to
connection settings.
Home
CaptureOnTouch Settings
2019/10/23 10:13:39